DeArmond Dynasonic Neck Pickup White

Essentially new, purchased to install in a guitar at the shop, which we ended up not doing.

From DeArmond:

Here they are, the NEW Dearmond Dynasonics in white! Dearmond has released a revamped take on the old Dynasonic pickup. These are slightly hotter than a vintage example and will fit in a much shallower route. They are available in both bridge and neck versions and come with an arched mounting ring spacer and four screws. The neck position is reverse wound/reverse magnetic polarity so they are hum-canceling in the middle position. Both models have about ten inches of two conductor plus shield lead wire. The larger cylindrical polepieces are adjustable by turning the smaller machine screws.The bridge model averages around 8.9K DC resistance and 5 henries inductance, measured on an Extech meter. The "upper" part of the pickup, essentially the part inside the ring, is 15 mm tall, a bit over 9/16". The underside needs about 5 mm clearance or about 3/16". The total thickness of the pickup is about 19 mm or 3/4".